Image shown is a representation only, actual part may vary.
Description
| Motor Type | Induction |
| Frame Size | 2.76 in |
| Output Power | 15 W (1/50 HP) |
| Voltage (VAC) | Single-Phase 110/115 VAC |
| Frequency (Hz) | 60 |
| Current | 0.33 A [110 VAC]0.34 A [115 VAC] |
| Shaft/Gear Type | Parallel Shaft Gearhead |
| Gear Ratio (X:1) | 3.6 :1 |
| Output Shaft | Imperial |
| Output Shaft Diameter | 3/8 in. |
| Type | Lead Wire |
| Rated Torque | 2.7 lb-in |
| Rated Speed (rpm) | 500 |
| Permissible Load Inertia | 9.98 oz-in² |
| Permissible Overhung Load | 0.39 in. from Shaft End = 18 lb0.79 in. from Shaft End = 27 lb |
| Permissible Thrust Load | 9 lb |
| RoHS Compliant | Yes |
| Safety Standards | ULCSACCCENCE |
| CE Marking | Low Voltage Directives |
| Insulation Resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| Dielectric Strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | Temperature rise of windings are 176ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| Insulation Class | Class B (266ºF [130ºC]) |
| Overheat Protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 179.6ºF ± 27ºF (82ºC ± 15ºC) |
| Ambient Temperature Range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | 85% maximum (noncondensing) |
| Degree of Protection |
Additional information
| Alternate Part Number | 3IK15GN-AW2 |
|---|
